Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4505-1ACBZ-RLIC OPAMP VFB 1 CIRCUIT 6WLCSP |
1,300 | - |
|
Datasheet | - | 6-UFBGA, WLCSP | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 0.006V/µs | 50 kHz | - | 500 nA | 500 µV | 9µA | 40 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-WLCSP (0.91x1.39) |
|
ADA4051-2ACPZ-RLIC OPAMP ZERO-DRIFT 2CIRC 8LFCSP |
4,602 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 0.06V/µs | 125 kHz | - | 20 pA | 2 µV | 13µA (x2 Channels) | 15 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
ADA4841-2YCPZ-R2IC OPAMP GP 2 CIRCUIT 8LFCSP |
2,109 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 13V/µs | - | 80 MHz | 3 µA | 40 µV | 1.2mA (x2 Channels) | 60 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
OP482ACBZ-RLIC OPAMP JFET 4 CIRCUIT 14WLCSP |
3,741 | - |
|
Datasheet | - | 14-UFBGA, WLCSP | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x4 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-WLCSP (1.128x2.123) |
|
AD8574TRU-EP-RLIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
2,023 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Zero-Drift | 4 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 10 pA | 1 µV | 850µA (x4 Channels) | 30 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
HMC914LP4ETRIC LIMITING 1 CIRCUIT 24SMT |
2,858 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | - | 47mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
|
HMC750LP4ETRIC LIMITING 1 CIRCUIT 24SMT |
4,232 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | 3 mV | 106mA | - | 4.6 V | 5.4 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
HMC914LP4EIC LIMITING 1 CIRCUIT 24SMT |
3,586 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad | Strip | Obsolete | Limiting | 1 | Differential | - | - | - | - | - | 47mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
5962-8771901EAIC INST AMP 1 CIRCUIT 16CDIP |
4,236 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | - | 50 nA | 200 µV | 5mA | - | 36 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
5962-8773802PAIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,420 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.3V/µs | - | 600 kHz | 1.2 nA | 10 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
