Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6362IDDIC OPAMP DIFF 1 CIRCUIT 8DFN |
1,966 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Obsolete | Differential | 1 | Differential, Rail-to-Rail | 45V/µs | 180 MHz | 34 MHz | 75 nA | 75 µV | 1mA | - | 2.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6363HDCBIC OPAMP DIFF 1 CIRCUIT 8DFN |
1,131 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Obsolete | Differential | 1 | Differential, Rail-to-Rail | 75V/µs | 500 MHz | 35 MHz | 100 nA | 25 µV | 1.9mA | 55 mA | 2.8 V | 11 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (2x3) |
|
|
LTC6363IDCBIC OPAMP DIFF 1 CIRCUIT 8DFN |
2,758 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Obsolete | Differential | 1 | Differential, Rail-to-Rail | 75V/µs | 500 MHz | 35 MHz | 100 nA | 25 µV | 1.9mA | 55 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (2x3) |
|
LTC6431AIUF-20IC OPAMP GP 1 CIRCUIT 24QFN |
1,398 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tube | Obsolete | General Purpose | 1 | - | - | - | 2 GHz | - | - | 93mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
|
LTC6431BIUF-20IC OPAMP GP 1 CIRCUIT 24QFN |
1,716 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tube | Obsolete | General Purpose | 1 | - | - | - | 2 GHz | - | - | 93mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
LT6000IDCBIC OPAMP GP 1 CIRCUIT 6DFN |
2,481 | - |
|
Datasheet | - | 6-WFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.018V/µs | 60 kHz | - | 12 nA | 500 µV | 15µA | 10 mA | 1.8 V | 18 V | -40°C ~ 85°C | - | - | Surface Mount | 6-DFN (2x3) |
|
|
LTC6102IDDIC CURRENT SENSE 1 CIRCUIT 8DFN |
4,724 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Obsolete | Current Sense | 1 | - | - | 200 kHz | - | 3 nA | 5 µV | 420µA | 1 mA | 4 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1057SW#TRPBFIC OPAMP JFET 2 CIRCUIT 16SO |
2,540 | - |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
OP2177CRZIC OPAMP GP 2 CIRCUIT 8SOIC |
1,012 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 0.7V/µs | 1.3 MHz | - | 500 pA | 15 µV | 400µA (x2 Channels) | 10 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OP2177CRZ-REELIC OPAMP GP 2 CIRCUIT 8SOIC |
4,746 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.7V/µs | 1.3 MHz | - | 500 pA | 15 µV | 400µA (x2 Channels) | 10 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
