Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8012ARZ-REEL7IC OPAMP CFA 2 CIRCUIT 8SOIC |
1,074 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 2250V/µs | 75 MHz | 350 MHz | 3 µA | 1.5 mV | 1.7mA (x2 Channels) | 125 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD820ARMZIC OPAMP JFET 1 CIRCUIT 8MSOP |
1,062 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | J-FET | 1 | Rail-to-Rail | 3V/µs | 1.9 MHz | - | 2 pA | 400 µV | 700µA | 20 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
OP184ESZ-REEL7IC OPAMP GP 1 CIRCUIT 8SOIC |
9,677 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | 80 nA | 100 µV | 2.25mA | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1801IS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
3,409 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 80 MHz | - | 25 nA | 75 µV | 1.6mA (x2 Channels) | 50 mA | 2.3 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
OP184ESZIC OPAMP GP 1 CIRCUIT 8SOIC |
931 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | 80 nA | 100 µV | 2.25mA | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LT1637IDD#PBFIC OPAMP GP 1 CIRCUIT 8DFN |
586 | - |
|
Datasheet | Over-The-Top® | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1.1 MHz | - | 17 nA | 125 µV | 230µA | 31.7 mA | 2.7 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LTC6101HVAHS5#TRPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
2,364 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 85 µV | 350µA | 1 mA | 5 V | 100 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LTC6101HVAHS5#TRMPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
1,236 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 85 µV | 350µA | 1 mA | 5 V | 100 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LT1351CS8#TRPBFIC VOLTAGE FEEDBACK 1 CIRC 8SO |
8,681 | - |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 200V/µs | 3 MHz | - | 20 nA | 200 µV | 250µA | 13.4 mA | 5 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
ADA4091-2ARZ-R7IC OPAMP GP 2 CIRCUIT 8SOIC |
2,366 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.46V/µs | 1.27 MHz | - | 50 nA | 45 µV | 200µA (x4 Channels) | 20 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
