Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ATIA202KNHigh Voltage Isolation Amplifier |
4,784 | - |
|
Datasheet | - | 38-DIP (0.500", 12.70mm), 10 Leads | Tape & Box (TB) | Active | Isolation | 1 | Single-Ended | - | - | 100 kHz | 30 pA | - | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-DIP |
|
|
AD202JYATIUpgraded Drop-in Replacement for |
200 | - |
|
Datasheet | - | 38-SIP, 10 Leads, Offset Leads | Tape & Box (TB) | Active | - | 1 | Single-Ended | - | - | 20 kHz | 30 pA | - | 10mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-SIP |
|
|
AD202JNATIUpgraded Drop-in Replacement for |
100 | - |
|
Datasheet | - | 38-DIP (0.500", 12.70mm), 10 Leads | Tape & Box (TB) | Active | - | 1 | Single-Ended | - | - | 20 kHz | 30 pA | - | 10mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-DIP |
|
|
OP Amps AT8557/TRZero-Drift RRIO CMOS Op-Amp |
2,110 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Box (TB) | Active | CMOS, Zero-Drift | 1 | Rail-to-Rail | 2.5V/µs | 4.3 MHz | - | 50 pA | 20 µV | 650µA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
AT8557/TRZero-Drift RRIO CMOS Op-Amp |
100 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | CMOS, Zero-Drift | 1 | Rail-to-Rail | 2.5V/µs | 4.3 MHz | - | 50 pA | 20 µV | 650µA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | - | Surface Mount | SOT-23-5 |
|
|
AD202KYATIUpgraded Drop-in Replacement for |
4,627 | - |
|
Datasheet | - | 38-SIP, 10 Leads, Offset Leads | Bulk | Active | - | 1 | Single-Ended | - | - | 20 kHz | 30 pA | - | 10mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-SIP |
|
AT8551/TRZero-Drift RRIO CMOS Op-Amp |
100 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | CMOS, Zero-Drift | 1 | Rail-to-Rail | 2.7V/µs | 4.5 MHz | - | 50 pA | 20 µV | 640mA | 50 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
AD202KNATIUpgraded Drop-in Replacement for |
2,798 | - |
|
Datasheet | - | 38-DIP (0.500", 12.70mm), 10 Leads | Active | - | 1 | Single-Ended | - | - | 20 kHz | 30 pA | - | 10mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-DIP | |
|
|
AT8091350MHz CMOS Rail to Rail Output |
3,091 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 232V/µs | 195 MHz | 79 MHz | 1 pA | 2 mV | 4.2mA | 120 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | - | - |
|
|
AT821Rail to Rail I/O CMOS OP |
2,447 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 10V/µs | 14 MHz | - | 1 pA | 600 µV | 1.9mA | 110 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
