Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSC199A2IQTPOA FOR VFQFPN 1.8X1.4X0.75 10L |
4,258 | - |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.32V/µs | - | 40 kHz | 28 µA | 150 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 10-QFN (1.8x1.4) |
|
TSH73CDTIC OPAMP GP 3 CIRCUIT 14SO |
4,929 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 3 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 1.1 mV | 8.2mA | 55 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
TS912INIC CMOS 2 CIRCUIT 8MINI DIP |
4,415 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.3V/µs | 1.4 MHz | - | 1 pA | 10 mV | 400µA (x2 Channels) | 75 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
TSH10IDIC OPAMP GP 1 CIRCUIT 8SOIC |
4,520 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 150V/µs | 140 MHz | - | 5 µA | 1 mV | 20mA | 70 mA | 6 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TS507CDTIC OPAMP GP 1 CIRCUIT 8SOIC |
4,767 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.6V/µs | 1.9 MHz | - | 8 nA | 25 µV | 850µA | 128 mA | 2.7 V | 5.5 V | 0°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TS952IDIC OPAMP GP 2 CIRCUIT 8SOIC |
1,542 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x2 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TS954INIC OPAMP GP 4 CIRCUIT 14DIP |
4,032 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x4 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 14-DIP |
|
|
TSH74CPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,602 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 118V/µs | 65 MHz | 100 MHz | 6 µA | 1.1 mV | 8.2mA | 55 mA | 3 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
|
TS514INIC OPAMP GP 4 CIRCUIT 14DIP |
2,795 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 500µA | 23 mA | 6 V | 30 V | -40°C ~ 125°C | - | - | Through Hole | 14-DIP |
|
|
TS27M2AINIC CMOS 2 CIRCUIT 8MINI DIP |
4,045 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | - | 0.6V/µs | 1 MHz | - | 1 pA | 900 µV | 150µA (x2 Channels) | 45 mA | 3 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 8-Mini DIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
