Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSC2010ISTIC CURR SENSE 1 CIRCUIT 8MINISO |
3,662 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 7.5V/µs | - | 820 kHz | 350 µA | 500 µV | 1.6mA | 36 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MiniSO |
|
TS954IYPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,054 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x4 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TL074CDIC OPAMP JFET 4 CIRCUIT 14SO |
907 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x4 Channels) | 40 mA | 6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
|
TL074IDIC OPAMP JFET 4 CIRCUIT 14SO |
299 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | - | 13V/µs | 3 MHz | - | 20 pA | 3 mV | 1.4mA (x4 Channels) | 40 mA | 6 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 14-SO |
|
|
LF347DIC OPAMP JFET 4 CIRCUIT 14SO |
1,014 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | - | 16V/µs | 3 MHz | - | 20 pA | 3 mV | 1.4mA (x4 Channels) | 40 mA | 44 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
TL072CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,182 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 16V/µs | 3 MHz | - | 20 pA | 3 mV | 1.4mA | 40 mA | 6 V | 36 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TSC103IPTIC CURR SENSE 1 CIRCUIT 8TSSOP |
17,760 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.6V/µs | - | 700 kHz | 10 µA | 500 µV | 200µA | 26 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
|
TS922AIYDTIC OPAMP GP 2 CIRCUIT 8SOIC |
3,775 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 900 µV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TSB582IQ2THIGH OUTPUT CURRENT WITH THERMAL |
3,582 | - |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 3.1 MHz | - | 2 nA | 2.4 mV | 2.5mA (x2 Channels) | 200 mA | 2 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
TSB582IDT200 MA OUTPUT CURRENT WITH THERM |
2,640 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 3.1 MHz | - | 2 nA | 2.4 mV | 2.5mA (x2 Channels) | 200 mA | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
