Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSV358AIDTIC OPAMP GP 2 CIRCUIT 8SO |
4,431 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.6V/µs | 1.4 MHz | - | 70 nA | 100 µV | 500µA | 80 mA | 2.5 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
LF253DTIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,228 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 16V/µs | 4 MHz | - | 20 pA | 3 mV | 1.4mA (x2 Channels) | 40 mA | 6 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
TSB571IYLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
6,714 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 2.5 MHz | - | 8 nA | 1.5 mV | 380µA | 65 mA | 4 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
TSB511IYLTRAIL-TO-RAIL INPUTS AND OUTPUTS, |
424 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 3V/µs | 6 MHz | - | - | 1.5 mV | 1.8mA | 50 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
MC3303PTIC OPAMP GP 4 CIRCUIT 14TSSOP |
9,166 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 40 nA | 1 mV | 2.8mA (x4 Channels) | 30 mA | 3 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 14-TSSOP |
|
TSV522IQ2TIC CMOS 2 CIRCUIT 8DFN |
5,305 | - |
|
Datasheet | - | 8-UFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.89V/µs | 1.15 MHz | - | 1 pA | 1 mV | 45µA (x2 Channels) | 55 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-DFN (2x2) |
|
|
TS461CLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,664 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA | - | 2.7 V | 10 V | -20°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
|
TL084BIDTIC OPAMP JFET 4 CIRCUIT 14SO |
40,442 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 16V/µs | 4 MHz | - | 20 pA | 1 mV | 1.4mA (x4 Channels) | 40 mA | 6 V | 36 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
TSV358IYPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
3,080 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.6V/µs | 1.4 MHz | - | 70 nA | 200 µV | 500µA | 80 mA | 2.5 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
|
LM258APTIC OPAMP GP 2 CIRCUIT 8TSSOP |
21,699 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 1 mV | 700µA (x2 Channels) | 40 mA | 3 V | 30 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
