Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSX921ILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
183 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 10 MHz | - | 10 pA | 4 mV | 2.8mA | 74 mA | 4 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
TSV622AISTIC CMOS 2 CIRCUIT 8MINISO |
3,749 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.14V/µs | 420 kHz | - | 1 pA | 1 mV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TS932IDTIC OPAMP GP 2 CIRCUIT 8SOIC |
4,262 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 10 mV | 20µA (x2 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
TSV992IYDTIC OPAMP GP 2 CIRCUIT 8SOIC |
33,047 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 10V/µs | 20 MHz | - | 1 pA | 100 µV | 820µA (x2 Channels) | 35 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
TSC101CILTIC CURR SENSE 1 CIRCUIT SOT23-5 |
25,732 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.9V/µs | - | 450 kHz | 5.5 µA | 200 µV | 165µA | 60 mA | 4 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
TSC101BILTIC CURR SENSE 1 CIRCUIT SOT23-5 |
5,944 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.9V/µs | - | 670 kHz | 5.5 µA | 200 µV | 165µA | 60 mA | 4 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
TSU102IQ2TIC CMOS 2 CIRCUIT 8DFN |
5,413 | - |
|
Datasheet | - | 8-WFDFN | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 100 µV | 650nA (x2 Channels) | 11 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (2x2) |
|
|
TS952IDTIC OPAMP GP 2 CIRCUIT 8SOIC |
10,635 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 3 MHz | - | 35 nA | 6 mV | 950µA (x2 Channels) | 10 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TSV791IYLTHIGH BANDWIDTH (50MHZ) LOW OFFSE |
3,000 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 50 MHz | - | 2 pA | 200 µV | 5.5mA | 70 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
TSZ182IDTIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
16,472 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 4.7V/µs | 3 MHz | - | 30 pA | 25 µV | 800µA (x2 Channels) | 29 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
