Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TL062IDIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,795 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | 20 mA | 6 V | 36 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
TL082IDIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,568 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 16V/µs | 4 MHz | - | 20 pA | 3 mV | 1.4mA | 40 mA | 6 V | 36 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
|
TSB712AIYDTIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 3V/µs | 6 MHz | - | 300 nA | 650 µV | 1.8mA | 50 mA | 2.7 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TS922IYPTIC OPAMP GP 2 CIRCUIT 8TSSOP |
7,995 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 3 mV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
TSU104IQ4TIC CMOS 4 CIRCUIT 16QFN |
19,103 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 100 µV | 650nA (x4 Channels) | 11 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
|
TSZ181HYLTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,993 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 4.7V/µs | 3 MHz | - | 30 pA | 25 µV | 800µA | 29 mA | 2.2 V | 5.5 V | -40°C ~ 150°C | - | - | Surface Mount | SOT-23-5 |
|
TSU104IPTIC CMOS 4 CIRCUIT 14TSSOP |
37,018 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 100 µV | 650nA (x4 Channels) | 11 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
TSC200IDTHIGH VOLTAGE, CURRENT SENSE AMPL |
6,068 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Open Drain | 7V/µs | - | 1 MHz | 500 nA | 100 µV | 840µA | - | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
TSC200ISTLOW / HIGH SIDE BIDIRECTIONAL, Z |
2,415 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Open Drain | 7V/µs | - | 1 MHz | 500 nA | 100 µV | 840µA | - | 2.7 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MiniSO |
|
TS922EIJTIC OPAMP GP 2 CIRCUIT 8FCBGA |
7,816 | - |
|
Datasheet | - | 8-UFBGA, FCBGA | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 1.5 mV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-FCBGA (1.6x1.6) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
