Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSX634AIPTIC CMOS 4 CIRCUIT 14TSSOP |
2,270 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 700 µV | 45µA | 92 mA | 3.3 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
TSC1031IPTIC CURR SENSE 1 CIRCUIT 8TSSOP |
4,256 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.6V/µs | - | 700 kHz | 10 µA | 500 µV | 200µA | 26 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
TSC2011ISTIC CURR SENSE 1 CIRCUIT 8MINISO |
3,885 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 3.5V/µs | - | 750 kHz | 350 µA | 500 µV | 1.6mA | 36 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MiniSO |
|
TSC2012ISTIC CURR SENSE 1 CIRCUIT 8MINISO |
3,885 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 5.2V/µs | - | 490 kHz | 350 µA | 500 µV | 1.6mA | 36 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MiniSO |
|
UA741IDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,991 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 10 nA | 1 mV | 1.7mA | 25 mA | 10 V | 44 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
|
TS922AIDIC OPAMP GP 2 CIRCUIT 8SOIC |
879 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.3V/µs | 4 MHz | - | 15 nA | 900 µV | 2mA | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TS934AIYDTIC OPAMP GP 4 CIRCUIT 14SO |
2,485 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 5 mV | 20µA (x4 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
TS914AIDIC CMOS 4 CIRCUIT 14SO |
720 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 1.4 MHz | - | 1 pA | 5 mV | 230µA | 60 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
TL084BCDTIC OPAMP JFET 4 CIRCUIT 14SO |
113,541 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 16V/µs | 4 MHz | - | 20 pA | 1 mV | 1.4mA (x4 Channels) | 40 mA | 6 V | 36 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
TSU112IYQ3TIC CMOS 2 CIRCUIT 8DFN |
1,442 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.0031V/µs | 9 kHz | - | 1 pA | 150 µV | 1µA (x2 Channels) | 45 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | 8-DFN (2x2) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
