Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM7171AIMIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
3,755 | - |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2251UAG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,536 | - |
|
Datasheet | microPOWER™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 20 nA | 100 µV | 27µA (x2 Channels) | 50 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
VCA821IDRIC VARIABLE GAIN 1 CIRC 14SOIC |
4,700 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Variable Gain | 1 | - | 2500V/µs | - | 710 MHz | 19 µA | 4 mV | 34mA | 90 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
INA145UAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,237 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | - | 0.45V/µs | - | 500 kHz | 50 nA | 200 µV | 570µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC6084AIMIC CMOS 4 CIRCUIT 14SOIC |
4,121 | - |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMC6494AEMIC CMOS 4 CIRCUIT 14SOIC |
1,954 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
BUF634FIC BUFFER 1 CIRC DDPAK/TO263-5 |
2,154 | - |
|
Datasheet | - | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Obsolete | Buffer | 1 | - | 2000V/µs | - | 180 MHz | 5 µA | 30 mV | 15mA | 250 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
OPA593DNTR85-V, 100-UV WIDE-BANDWIDTH (10 |
1,167 | - |
|
Datasheet | - | 12-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Power | 1 | Push-Pull, Rail-to-Rail | 45V/µs | 10 MHz | - | 1 pA | 20 µV | 3.25mA | 250 mA | 8 V | 85 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 12-WSON (4x4) |
|
|
OPA124U/2K5E4IC OPAMP GP 1 CIRCUIT 8SOIC |
4,833 | - |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.5 MHz | - | 1 pA | 200 µV | 2.5mA | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6646MMIC OPAMP VFB 2 CIRCUIT 8VSSOP |
3,675 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA (x2 Channels) | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
