Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4302RGTTG4IC OPAMP GP 1 CIRCUIT 16VQFN |
4,550 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 5500V/µs | 12 GHz | 2.4 GHz | 7 µA | 2 mV | 37mA | - | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
LM6132BIMXIC OPAMP GP 2 CIRCUIT 8SOIC |
1,944 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2703UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
1,633 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3201DBVTG4IC OPAMP CFA 1 CIRCUIT SOT23-5 |
1,268 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC254CNE4QUAD, 16-V, 1.7-MHZ, IN TO V- OP |
3,160 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Push-Pull | 4.6V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 3.8mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
.jpg "INA4290A5IRGVT")
|
INA4290A5IRGVTIC OPAMP |
2,109 | - |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | - | - | 2V/µs | - | 800 kHz | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
LM8262MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,759 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 15V/µs | 24 MHz | - | 1.05 µA | 700 µV | 2.5mA (x2 Channels) | 100 mA | 2.5 V | 22 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
INA333AIDGKTG4IC INST AMP 1 CIRCUIT 8VSSOP |
2,827 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Instrumentation | 1 | Rail-to-Rail | 0.16V/µs | - | 150 kHz | 70 pA | 10 µV | 50µA | 40 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2277TDD1IC OPAMP GP 2 CIRCUIT DIE |
1,928 | - |
|
Datasheet | - | Die | Tube | Obsolete | General Purpose | 2 | - | - | - | - | - | 25 µV | - | - | 4 V | 36 V | - | - | - | Surface Mount | Die |
|
THS3062DDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
3,330 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 7000V/µs | 2.2 GHz | 300 MHz | 6 µA | 700 µV | 8.3mA | 145 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
