Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS3122IDDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
2,443 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
THS3115IPWPIC OPAMP CFA 2 CIRCUIT 14HTSSOP |
3,610 | - |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tube | Active | Current Feedback | 2 | - | 1550V/µs | - | 110 MHz | 330 nA | 3 mV | 4.9mA (x2 Channels) | 270 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-HTSSOP |
|
|
THS3115CPWPIC OPAMP CFA 2 CIRCUIT 14HTSSOP |
1,290 | - |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tube | Active | Current Feedback | 2 | - | 1550V/µs | - | 110 MHz | 330 nA | 3 mV | 4.9mA (x2 Channels) | 270 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-HTSSOP |
|
LOG104AIDRIC LOG/LOG 1 CIRCUIT 8SOIC |
2,618 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | - | 45 kHz | 5 pA | 300 µV | 1mA | - | 9 V | 36 V | -5°C ~ 75°C | - | - | Surface Mount | 8-SOIC |
|
|
LOG104AIDRG4IC LOG/LOG 1 CIRCUIT 8SOIC |
4,222 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | - | 45 kHz | 5 pA | 300 µV | 1mA | - | 9 V | 36 V | -5°C ~ 75°C | - | - | Surface Mount | 8-SOIC |
|
THS4304DBVRIC OPAMP VFB 1 CIRCUIT SOT23-5 |
3,617 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 830V/µs | 870 MHz | 3 GHz | 7 µA | 500 µV | 18mA | - | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TL054AIDIC OPAMP JFET 4 CIRCUIT 14SOIC |
3,199 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 500 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
OPA4227PAG4IC OPAMP GP 4 CIRCUIT 14DIP |
2,529 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LMH6514SQ/NOPBIC VARIABLE GAIN 1 CIRC 16WQFN |
4,364 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Variable Gain | 1 | Differential | - | - | 600 MHz | - | - | 107mA | - | 4 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-WQFN (4x4) |
|
|
OPA4132UAG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,900 | - |
|
Datasheet | OPAx132 | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x4 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
