Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM1458NIC OPAMP GP 2 CIRCUIT 8DIP |
1,779 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 200 nA | 1 mV | 3mA (x2 Channels) | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF356NIC OPAMP JFET 1 CIRCUIT 8DIP |
4,877 | - |
|
Datasheet | BI-FET™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 pA | 3 mV | 5mA | - | 30 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM358ANIC OP AMP 2CH 8-PDIP |
0 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | - | 1.1 MHz | - | 45 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM833NIC AUDIO 2 CIRCUIT 8DIP |
2,625 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Audio | 2 | - | 7V/µs | 15 MHz | - | 500 nA | 300 µV | 5mA (x2 Channels) | 37 mA | 30 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM741CNIC OPAMP GP 1 CIRCUIT 8DIP |
1,971 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1.5 MHz | - | 80 nA | 2 mV | 1.7mA | 25 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM358NIC OP AMP 2CH 8-PDIP |
0 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | - | 700 kHz | - | 45 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM348N/NOPBIC OPAMP GP 4 CIRCUIT 14DIP |
1,993 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
HPA00215EA/3KIC CMOS 2 CIRCUIT SOT23-8 |
3,129 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.02V/µs | 70 kHz | - | 0.5 pA | 2 mV | 1µA (x2 Channels) | 8 mA | 1.8 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
JL411BPAIC OPAMP JFET 1 CIRCUIT 8CDIP |
2,282 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bag | Obsolete | J-FET | 1 | - | 7V/µs | 3 MHz | - | 50 pA | 30 µV | 4mA | - | - | - | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
|
JL412BPAIC OPAMP JFET 2 CIRCUIT 8CDIP |
3,625 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bag | Obsolete | J-FET | 2 | - | 7V/µs | 3 MHz | - | 50 nA | 7 mV | - | 80 mA | 10 V | 10 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
