Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC27L2BCDRIC CMOS 2 CIRCUIT 8SOIC |
4,101 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 204 µV | 20µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2337UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
14,056 | - |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 1.2V/µs | 3 MHz | - | 0.2 pA | 500 µV | 525µA (x2 Channels) | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM13700MX/NOPBIC OPAMP TRANSCOND 2 CIRC 16SOIC |
5,409 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Transconductance | 2 | Push-Pull | 50V/µs | 2 MHz | - | 400 nA | 300 µV | 2.6mA (x2 Channels) | 500 µA | 10 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
LMV324MX/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
8,969 | - |
|
Datasheet | LMV® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 410µA (x4 Channels) | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
TLV2371QDBVRQ1IC OPAMP GP 1 CIRCUIT SOT23-5 |
15,806 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
|
TLC27L4CDRIC CMOS 4 CIRCUIT 14SOIC |
14,093 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC27L2BIDRIC CMOS 2 CIRCUIT 8SOIC |
9,633 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 240 µV | 20µA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2170IDGKRIC OPAMP GP 1 CIRCUIT 8VSSOP |
7,964 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 10 pA | 500 µV | 125µA | 17 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC272CDRIC CMOS 2 CIRCUIT 8SOIC |
115,059 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 1.9mA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LF412CDRIC OPAMP JFET 2 CIRCUIT 8SOIC |
6,640 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 50 pA | 500 µV | 4.5mA (x2 Channels) | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
