Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA197QDGKRQ1IC OPAMP GP 1 CIRCUIT 8VSSOP |
1,668 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 20V/µs | 10 MHz | - | 5 pA | 25 µV | 1mA | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
TLE2071CPIC OPAMP JFET 1 CIRCUIT 8DIP |
1,198 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 45V/µs | 10 MHz | - | 20 pA | 490 µV | 1.7mA | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OPA2377QDGKRQ1IC CMOS 2 CIRCUIT 8VSSOP |
422 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 5.5 MHz | - | 0.2 pA | 250 µV | 760µA (x2 Channels) | 50 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
|
LMV932MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
21,705 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
INA190A1IDDFRIC CURR SENSE 1 CIRCUIT TSOT23-8 |
13,878 | - |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 45 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
LMH6601MGX/NOPBIC OPAMP VFB 1 CIRCUIT SC70-6 |
1,857 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 275V/µs | 155 MHz | 250 MHz | 5 pA | 1 mV | 9.6mA | 180 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
LMV932MA/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
1,729 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA1662AIDIC AUDIO 2 CIRCUIT 8SOIC |
4,009 | - |
|
Datasheet | SoundPlus™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 2 | Rail-to-Rail | 17V/µs | 22 MHz | - | 600 nA | 500 µV | 1.5mA (x2 Channels) | 30 mA | 3 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LPV511MG/NOPBIC OPAMP GP 1 CIRCUIT SC70-5 |
2,136 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0077V/µs | 25 kHz | - | 320 pA | 200 µV | 1.2µA | 1.3 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
OPA206ADRPROTOTYPE |
688 | - |
|
Datasheet | e-trim™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
