Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2374AIDCNTIC CMOS 2 CIRCUIT SOT23-8 |
6,777 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 5V/µs | 6.5 MHz | - | 0.5 pA | 1 mV | 585µA (x2 Channels) | 5 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
INA280A3QDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-5 |
1,533 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | - | 20 µA | 15 µV | 370µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
|
|
INA280A1QDCKRQ1IC CURR SENSE 1 CIRCUIT SC70-5 |
768 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | - | 20 µA | 15 µV | 370µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-5 |
|
OPA2863IDGKRIC OPAMP VFB 2 CIRCUIT 8VSSOP |
3,870 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 105V/µs | 50 MHz | 110 MHz | 300 nA | 400 µV | 700µA (x2 Channels) | 45 mA | 2.7 V | 12.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
OPA837IDBVRIC OPAMP VFB 1 CIRCUIT SOT23-6 |
2,803 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 105V/µs | 50 MHz | - | 340 nA | 30 µV | 592µA | - | 2.7 V | 5.4 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
OPA837IDCKRIC OPAMP VFB 1 CIRCUIT SC70-5 |
1,055 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 105V/µs | 50 MHz | - | 340 nA | 30 µV | 592µA | - | 2.7 V | 5.4 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
OPA2863DRDUAL, LOW-POWER, 110-MHZ, 12-V, |
1,026 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 105V/µs | 50 MHz | 110 MHz | 300 nA | 400 µV | 700µA (x2 Channels) | 45 mA | 2.7 V | 12.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA838IDBVRIC OPAMP VFB 1 CIRCUIT SOT23-6 |
3,426 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 350V/µs | 300 MHz | - | 1.5 µA | 15 µV | 960µA | - | 2.7 V | 5.4 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
OPA357AIDBVTIC OPAMP VFB 1 CIRCUIT SOT23-6 |
1,551 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
OPA4323IPWRQUAD, 5.5-V, 20-MHZ, ZERO-CROSS |
1,877 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Single Ended, Rail-to-Rail | 33V/µs | 20 MHz | - | 0.5 pA | 150 µV | 1.6mA (x4 Channels) | 110 mA | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
