Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA210IDRIC OPAMP |
5,644 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Push-Pull | 6.4V/µs | 18 MHz | - | 300 nA | 5 µV | 2.2mA | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA328DBVRPRECISION, ZERO-CROSSOVER, 50-V |
2,451 | - |
|
Datasheet | OPAx328 | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 30V/µs | 40 MHz | - | 0.2 pA | 3 µV | 3.8mA | 65 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
OPA2330AIDIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
271 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS, Zero-Drift | 2 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 200 pA | 8 µV | 21µA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA725AIDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
392 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 20 MHz | - | 30 pA | 1.2 mV | 4.3mA | 40 mA | 4 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
PGA112AIDGSTIC OPAMP PGA 1 CIRCUIT 10VSSOP |
1,790 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 1 | Rail-to-Rail | 8V/µs | - | 10 MHz | 1.5 nA | 75 µV | 330µA | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
LME49720MAX/NOPBIC AUDIO 2 CIRCUIT 8SOIC |
1,620 | - |
|
Datasheet | LME® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Audio | 2 | - | 20V/µs | 55 MHz | - | 10 nA | 100 µV | 10mA (x2 Channels) | 26 mA | 5 V | 34 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA1656IDIC AUDIO 2 CIRCUIT 8SOIC |
780 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 2 | Rail-to-Rail | 24V/µs | 53 MHz | - | 10 pA | 500 µV | 3.9mA (x2 Channels) | 100 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2356AIDGKRIC CMOS 2 CIRCUIT 8VSSOP |
649 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 360V/µs | 200 MHz | 450 MHz | 3 pA | 2 mV | 8.3mA (x2 Channels) | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TLC2254AIDIC OPAMP GP 4 CIRCUIT 14SOIC |
508 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
OPA2727AIDRBTIC CMOS 2 CIRCUIT 8SON |
236 | - |
|
Datasheet | e-trim™ | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 30V/µs | 20 MHz | - | 85 pA | 15 µV | 4.3mA (x2 Channels) | 40 mA | 3.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
