Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2387DGKTIC OPAMP |
2,247 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 2.8V/µs | 5.7 MHz | - | 30 pA | 0.25 µV | 570µA (x2 Channels) | 55 mA | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
LMC6064IMX/NOPBIC CMOS 4 CIRCUIT 14SOIC |
1,557 | - |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 80µA (x4 Channels) | 26 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
OPA227PAIC OPAMP GP 1 CIRCUIT 8DIP |
229 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
OPA1644AIDIC AUDIO 4 CIRCUIT 14SOIC |
8,575 | - |
|
Datasheet | SoundPlus™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 4 | Rail-to-Rail | 20V/µs | 11 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA842IDRIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
19,900 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 400V/µs | 200 MHz | - | 20 µA | 300 µV | 20.2mA | 100 mA | 10 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA4354AIDRIC CMOS 4 CIRCUIT 14SOIC |
9,099 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA (x4 Channels) | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
LMP2022MM/NOPBIC OPAMP ZERO-DRIFT 2CIRC 8VSSOP |
2,339 | - |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 2 | - | 2.6V/µs | 5 MHz | - | 25 pA | 0.4 µV | 1.1mA (x2 Channels) | 50 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA27GPIC OPAMP GP 1 CIRCUIT 8DIP |
562 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 1.9V/µs | 8 MHz | - | 15 nA | 25 µV | 3.3mA | 25 mA | 8 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
PGA117AIPWRIC OPAMP PGA 1 CIRCUIT 20TSSOP |
1,655 | - |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 1 | Rail-to-Rail | 8V/µs | - | 10 MHz | 1.5 nA | 75 µV | 330µA | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 20-TSSOP |
|
INA2191A5IYBJRIC CURR SENSE 2 CIRCUIT 12DSBGA |
1,104 | - |
|
Datasheet | - | 12-WFBGA, DSBGA | Tape & Reel (TR) | Active | Current Sense | 2 | Rail-to-Rail | 0.3V/µs | 27 kHz | - | 100 nA | 2.5 µV | 86µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 12-DSBGA |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
