Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA4189IDRQUAD, 14-MHZ, MUX-FRIENDLY, ZERO |
2,330 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 20V/µs | 14 MHz | 8 MHz | 70 pA | 800 µV | 1.3mA (x4 Channels) | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMP7704MT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,417 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 1.1V/µs | 2.5 MHz | - | 0.2 pA | 37 µV | 3.2mA (x4 Channels) | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMH6321MRX/NOPBIC BUFFER 1 CIRCUIT 8SOPWRPAD |
1,030 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Buffer | 1 | - | 2900V/µs | - | 110 MHz | 2 µA | 4 mV | 14.9mA | 295 mA | 5 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA4336EA/250IC CMOS 4 CIRCUIT 16SSOP |
720 | - |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.03V/µs | 100 kHz | - | 1 pA | 60 µV | 20µA (x4 Channels) | 5 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
OPA4141AIDIC OPAMP JFET 4 CIRCUIT 14SOIC |
621 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 10 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA4141AIPWIC OPAMP JFET 4 CIRCUIT 14TSSOP |
314 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 10 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AMC1300DWVRIC ISOLATION 8SOIC |
285 | - |
|
Datasheet | - | 8-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | 1 MHz | - | 30 µA | 10 µV | 5.9mA | 14 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA691IDIC OPAMP CFA 1 CIRCUIT 8SOIC |
2,364 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2100V/µs | 2 GHz | 280 MHz | 15 µA | 500 µV | 5.1mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AMC1200SDUBIC OPAMP ISOLATION 1 CIRC 8SOP |
723 | - |
|
Datasheet | - | 8-SMD, Gull Wing | Bulk | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 200 µV | 5.4mA | 20 mA | 2.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOP |
|
|
AMC1200BDUBIC OPAMP ISOLATION 1 CIRC 8SOP |
216 | - |
|
Datasheet | - | 8-SMD, Gull Wing | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 200 µV | 5.4mA | 20 mA | 2.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
