Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA122PAIC INST AMP 1 CIRCUIT 8DIP |
146 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.16V/µs | - | 120 kHz | 10 nA | 150 µV | 60µA | 30 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA892DROPA892DR |
2,169 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull | 700V/µs | 2 GHz | 110 MHz | 9 µA | 200 µV | 7.5mA | 200 mA | 9 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
.jpg "INA4290A5IRGVR")
|
INA4290A5IRGVRIC CURR SENSE 4 CIRCUIT 16VQFN |
5,723 | - |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 4 | - | 2V/µs | 1.1 MHz | - | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
|
INA4290A1IRGVRIC CURR SENSE 4 CIRCUIT 16VQFN |
4,578 | - |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 4 | - | 2V/µs | 1.1 MHz | - | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
|
INA4290A3IRGVRIC CURR SENSE 4 CIRCUIT 16VQFN |
1,128 | - |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 4 | - | 2V/µs | 1.1 MHz | - | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
THS7530PWPIC VARIABLE GAIN 1 CIRC 14HTSSOP |
272 | - |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | Variable Gain | 1 | Differential | 1250V/µs | - | 300 MHz | 20 µA | - | 40mA | 37 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-HTSSOP |
|
OPA227PIC OPAMP GP 1 CIRCUIT 8DIP |
370 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 5 µV | 3.7mA | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS7001IPWPIC OPAMP PGA 1 CIRCUIT 20HTSSOP |
396 | - |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Tube | Active | Programmable Gain | 1 | - | 85V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 7mA | 95 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HTSSOP |
|
THS4011IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
255 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | - | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2892DGNRDual-channel, 2GHz, 10V/V stable |
2,872 | - |
|
Datasheet | OPAx892 | 8-PowerTSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull | 700V/µs | 2 GHz | 100 MHz | 9 µA | 200 µV | 7.5mA (x2 Channels) | 200 mA | 9 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
