Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TL972IDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,447 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA (x2 Channels) | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TS321IDRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,034 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.4V/µs | 800 kHz | - | 20 nA | 500 µV | 600µA | 40 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV8801DBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
4,784 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0015V/µs | 6 kHz | - | 0.1 pA | 550 µV | 450nA | 4.7 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
TL081ACDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,405 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TSV912AIDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,770 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 4.5V/µs | 8 MHz | 80 kHz | 1 pA | 1.5 mV | 550µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
OPA1678IDRGRIC AUDIO 2 CIRCUIT 8SON |
1,930 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | Rail-to-Rail | 9V/µs | 16 MHz | - | 10 pA | 500 µV | 2mA (x2 Channels) | 50 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
TL032IPIC OPAMP JFET 2 CIRCUIT 8DIP |
404 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 570 µV | 434µA (x2 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA214AIRSWRIC CURR SENSE 1 CIRCUIT 10UQFN |
3,040 | - |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 30 kHz | - | 28 µA | 1 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
TLV9062SIDGSRIC CMOS 2 CIRCUIT 10VSSOP |
4,721 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 0.5 pA | 300 µV | 538µA (x2 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-VSSOP |
|
MC3303NIC OPAMP GP 4 CIRCUIT 14DIP |
1,147 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 0.6V/µs | 1 MHz | - | 200 nA | 2 mV | 2.8mA (x4 Channels) | 30 mA | 5 V | 30 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
