Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMV641MAE/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
258 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.6V/µs | 10 MHz | - | 70 nA | 30 µV | 158µA | 112 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA890IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
300 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 500V/µs | 130 MHz | 260 MHz | 100 nA | 1 mV | 1.1mA | 40 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLC070IPIC OPAMP GP 1 CIRCUIT 8DIP |
548 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
INA281A5IDBVRIC CURR SENSE 1 CIRCUIT SOT23-5 |
2,463 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.5V/µs | 900 kHz | - | 20 µA | 15 µV | 1.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
INA281B5IDBVRIC CURR SENSE 1 CIRCUIT SOT23-5 |
2,342 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2.5V/µs | 900 kHz | - | 20 µA | 15 µV | 1.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
TLC082AIDRIC OPAMP GP 2 CIRCUIT 8SOIC |
2,030 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x2 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLE2072AIDRIC OPAMP JFET 2 CIRCUIT 8SOIC |
1,025 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2252AIDIC OPAMP GP 2 CIRCUIT 8SOIC |
31,979 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLC2254CDRIC OPAMP GP 4 CIRCUIT 14SOIC |
6,315 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC2262AIPIC CMOS 2 CIRCUIT 8DIP |
135 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 425µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
