Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2772IDRIC CMOS 2 CIRCUIT 8SOIC |
7,105 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TLV2772IDGKRIC CMOS 2 CIRCUIT 8VSSOP |
6,474 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
OPA1S2384IDRCRIC TRANSIMPEDANCE 2 CIRC 10VSON |
5,375 | - |
|
Datasheet | - | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 2 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 9.2mA (x2 Channels) | 100 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSON (3x3) |
|
|
OPA2336EA/2K5IC CMOS 2 CIRCUIT 8VSSOP |
5,238 | - |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.03V/µs | 100 kHz | - | 1 pA | 60 µV | 20µA (x2 Channels) | 5 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA209AIDGKRIC OPAMP GP 1 CIRCUIT 8VSSOP |
4,710 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 6.4V/µs | 18 MHz | - | 1 nA | 35 µV | 2.2mA | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
THS4221DIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
485 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 990V/µs | 120 MHz | 230 MHz | 900 nA | 3 mV | 14mA | 100 mA | 2.7 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA188AIDIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
584 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2 MHz | - | 160 pA | 6 µV | 450µA | - | 4 V | 36 V | -55°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA188AIDGKTIC OPAMP ZERO-DRIFT 1CIRC 8VSSOP |
287 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2 MHz | - | 160 pA | 6 µV | 450µA | - | 4 V | 36 V | -55°C ~ 150°C | - | - | Surface Mount | 8-VSSOP |
|
OPA837IDBVTIC OPAMP VFB 1 CIRCUIT SOT23-6 |
231 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 105V/µs | 50 MHz | - | 340 nA | 30 µV | 592µA | - | 2.7 V | 5.4 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
TLE2081IPIC OPAMP JFET 1 CIRCUIT 8DIP |
182 | - |
|
Datasheet | Excalibur™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 45V/µs | 10 MHz | - | 20 pA | 490 µV | 1.7mA | 48 mA | 4.5 V | 38 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
