Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA190A4IRSWTIC CURR SENSE 1 CIRCUIT 10UQFN |
708 | - |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.25V/µs | 33 kHz | 20 kHz | 500 pA | 2 µV | 40µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
|
INA190A3IRSWTIC CURR SENSE 1 CIRCUIT 10UQFN |
452 | - |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.25V/µs | 35 kHz | 20 kHz | 500 pA | 2 µV | 40µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
LMV2011MA/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
260 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMP8481MME-T/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
1,332 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMP8481MME-H/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
247 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMP8481MME-S/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
3,804 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TL074MDEPIC OPAMP JFET 4 CIRCUIT 14SOIC |
629 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA (x4 Channels) | 10 mA | 7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
THS4221DBVTIC OPAMP VFB 1 CIRCUIT SOT23-5 |
268 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Rail-to-Rail | 990V/µs | 120 MHz | 230 MHz | 900 nA | 3 mV | 14mA | - | 2.7 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
THS4281DIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,254 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 35V/µs | - | 95 MHz | 500 nA | 500 µV | 800µA | 60 mA | 2.7 V | 16.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2336EA/250IC CMOS 2 CIRCUIT 8VSSOP |
2,966 | - |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.03V/µs | 100 kHz | - | 1 pA | 60 µV | 20µA (x2 Channels) | 5 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
