Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA188IDRJRIC OPAMP ZERO-DRIFT 1 CIRC 8SON |
1,552 | - |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.9V/µs | - | 600 kHz | 850 pA | 25 µV | 1.4mA | 18 mA | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (4x4) |
|
TLE2064CNIC OPAMP JFET 4 CIRCUIT 14DIP |
223 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 14-PDIP |
|
TLC2272IPIC CMOS 2 CIRCUIT 8DIP |
248 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 8-PDIP |
|
OPA353UAIC OPAMP GP 1 CIRCUIT 8SOIC |
345 | - |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 22V/µs | 44 MHz | - | 0.5 pA | 3 mV | 5.2mA | 40 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMP8602QMME/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
1,000 | - |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMP8603QMME/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
660 | - |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
OPA2743EA/250IC CMOS 2 CIRCUIT 8VSSOP |
745 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA (x2 Channels) | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
OPA694IDBVTIC OPAMP CFA 1 CIRCUIT SOT23-5 |
367 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 1700V/µs | - | 1.5 GHz | 5 µA | 500 µV | 5.8mA | 80 mA | 7 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA694IDIC OPAMP CFA 1 CIRCUIT 8SOIC |
105 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 1 | - | 1700V/µs | - | 1.5 GHz | 5 µA | 500 µV | 5.8mA | 80 mA | 7 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2321EA/250IC INST AMP 2 CIRCUIT 14TSSOP |
1,893 | - |
|
Datasheet | microPOWER™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | Rail-to-Rail | 0.4V/µs | - | 500 kHz | 10 pA | 1 mV | - | 16 mA | 2.5 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
