Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4271DIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
129 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 1000V/µs | 400 MHz | 1.4 GHz | 6 µA | 5 mV | 22mA | 160 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2695IDIC OPAMP CFA 2 CIRCUIT 8SOIC |
209 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | Differential | 2900V/µs | 1.1 GHz | 1.1 GHz | 20 µA | 300 µV | 25.8mA (x2 Channels) | 120 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6505MA/NOPBIC VARIABLE GAIN 1 CIRCUIT 8SOIC |
123 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Variable Gain | 1 | - | 1500V/µs | - | 150 MHz | 600 nA | - | 11mA | 80 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2691IDIC OPAMP CFA 2 CIRCUIT 8SOIC |
205 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 2100V/µs | 2 GHz | 280 MHz | 15 µA | 800 µV | 10.2mA (x2 Channels) | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV4113MDGQREPIC OPAMP GP 2 CIRCUIT 10HVSSOP |
6,758 | - |
|
Datasheet | - | 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA (x2 Channels) | 320 mA | 2.5 V | 6 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 10-HVSSOP |
|
LMH6504MM/NOPBIC VARIABLE GAIN 1 CIRC 8VSSOP |
2,864 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Not For New Designs | Variable Gain | 1 | - | 1500V/µs | - | 150 MHz | 1.4 µA | - | 11mA | 80 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
TLC2202CPSIC CMOS 2 CIRCUIT 8SO |
1,384 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LMP8358MT/NOPBIC OPAMP PGA 1 CIRCUIT 14TSSOP |
219 | - |
|
Datasheet | LMP® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 11V/µs | 240 MHz | 930 kHz | 6 pA | 0.9 µV | 1.9mA | 41 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
OPA453FAKTWTIC OPAMP GP 1 CIRC DDPAK/TO263-7 |
123 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 38V/µs | 7.5 MHz | - | 7 pA | 1 mV | 5.5mA | 50 mA | 20 V | 80 V | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
OPA564AIDWDIC OPAMP GP 1 CIRCUIT 20HSOP |
191 | - |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Bulk | Active | General Purpose | 1 | - | 40V/µs | 17 MHz | - | 10 pA | 2 mV | 39mA | 1.5 A | 7 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
