Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMP8601QMA/NOPBIC CURRENT SENSE 1 CIRCUIT 8SOIC |
380 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLE2072AIPIC OPAMP JFET 2 CIRCUIT 8DIP |
1,190 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 1 pA | 300 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
PGA117AIPWIC OPAMP PGA 1 CIRCUIT 20TSSOP |
4,485 | - |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Programmable Gain | 1 | Rail-to-Rail | 8V/µs | - | 10 MHz | 1.5 nA | 75 µV | 330µA | 60 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 20-TSSOP |
|
OPA2725AIDGKTIC CMOS 2 CIRCUIT 8VSSOP |
345 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 30V/µs | 20 MHz | - | 30 pA | 1.5 mV | 4.3mA (x2 Channels) | 40 mA | 3.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
THS4052IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
2,289 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 240V/µs | - | 70 MHz | 2.5 µA | 2.5 mV | 8.5mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
TLV2475AIPWPRIC CMOS 4 CIRCUIT 16HTSSOP |
4,548 | - |
|
Datasheet | - | 16-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-HTSSOP |
|
|
INA2290A2IDGKTIC CURR SENSE 1 CIRCUIT 8VSSOP |
193 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | - | 20 µA | 3 µV | 680µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
INA2290A1IDGKTIC CURR SENSE 1 CIRCUIT 8VSSOP |
131 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 2V/µs | 1.1 MHz | - | 20 µA | 6 µV | 680µA | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
TLC2201AMDIC OPAMP GP 1 CIRCUIT 8SOIC |
198 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 1 pA | 80 µV | 1.1mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMP7709MT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
276 | - |
|
Datasheet | LMP® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 5.9V/µs | 15 MHz | - | 0.2 pA | 37 µV | 2.9mA (x4 Channels) | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
