Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA190A3NDDFREPENHANCED PRODUCT, 40-V, BIDIRECT |
2,375 | - |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 35 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -55°C ~ 150°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
|
INA190A2NDDFREPENHANCED PRODUCT, 40-V, BIDIRECT |
1,735 | - |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 37 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -55°C ~ 150°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
TLC2202IPIC CMOS 2 CIRCUIT 8DIP |
3,624 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLE2144AINIC OPAMP GP 4 CIRCUIT 14DIP |
4,945 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x4 Channels) | 50 mA | 4 V | 44 V | -40°C ~ 105°C | - | - | Through Hole | 14-PDIP |
|
OPA2695IRGTTIC OPAMP CFA 2 CIRCUIT 16VQFN |
149 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 2 | Differential | 2900V/µs | 1.1 GHz | 1.1 GHz | 20 µA | 300 µV | 25.8mA (x2 Channels) | 120 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TLV2464AMPWREPIC OPAMP GP 4 CIRCUIT 14TSSOP |
669 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 150 µV | 550µA (x4 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
OPA3684IDBQTIC OPAMP CFA 3 CIRCUIT 16SSOP |
3,266 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 3 | - | 780V/µs | 120 MHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
THS4509QRGTRQ1IC OPAMP DIFF 1 CIRCUIT 16VQFN |
2,952 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 6600V/µs | 3 GHz | 2 GHz | 8 µA | 1 mV | 37.7mA | 96 mA | 3 V | 5.25 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 16-VQFN (3x3) |
|
|
OPA2205ADTDUAL, RAIL-TO-RAIL BIPOLAR PRECI |
244 | - |
|
Datasheet | e-trim™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA (x2 Channels) | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
THS3120CDGNIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
160 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Current Feedback | 1 | - | 1700V/µs | - | 130 MHz | 3 µA | 2 mV | 7mA | 490 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
