Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM348NSRIC OPAMP GP 4 CIRCUIT 14SO |
1,892 | - |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 8 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
|
TLV2631IDRIC OPAMP GP 1 CIRCUIT 8SOIC |
3,115 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 10V/µs | 9 MHz | - | 1 pA | 250 µV | 730µA | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TL084CDE4IC OPAMP JFET 4 CIRCUIT 14SOIC |
3,070 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 4 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x4 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
MC3403PWIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,810 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.6V/µs | 1 MHz | - | 200 nA | 2 mV | 2.8mA (x4 Channels) | 30 mA | 5 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLV2631IDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,068 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 9 MHz | - | 1 pA | 250 µV | 730µA | 28 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LM324ADBRIC OPAMP GP 4 CIRCUIT 14SSOP |
4,762 | - |
|
Datasheet | - | 14-SSOP (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SSOP |
|
|
TL074CDBRIC OPAMP JFET 4 CIRCUIT 14SSOP |
1,980 | - |
|
Datasheet | - | 14-SSOP (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 13V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SSOP |
|
|
LMV358IDRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
14,586 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 210µA (x2 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LMV821DCKRE4IC OPAMP GP 1 CIRCUIT SC70-5 |
4,698 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.9V/µs | 5.5 MHz | - | 40 nA | 1 mV | 300µA | - | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
|
OPA2338UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
4,202 | - |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 4.6V/µs | 12.5 MHz | - | 0.2 pA | 500 µV | 525µA (x2 Channels) | 9 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
