Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
RC4558DIC OPAMP GP 2 CIRCUIT 8SOIC |
2,893 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TL082ACPSRIC OPAMP JFET 2 CIRCUIT 8SO |
7,515 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
RC4559DRIC OPAMP GP 2 CIRCUIT 8SOIC |
1,149 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 2V/µs | 4 MHz | - | 40 nA | 2 mV | 3.3mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM324PWIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,596 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TLC27L4BCNIC CMOS 4 CIRCUIT 14DIP |
2,961 | - |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TL072CPSIC OPAMP JFET 2 CIRCUIT 8SO |
2,341 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Tube | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 65 pA | 3 mV | 1.4mA (x2 Channels) | - | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
OPA357AIDDARIC OPAMP VFB 1 CIRCUIT 8SOPWRPAD |
1,912 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 150V/µs | 100 MHz | 250 MHz | 3 pA | 2 mV | 4.9mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
LM358APWIC OPAMP GP 2 CIRCUIT 8TSSOP |
1,952 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 15 nA | 2 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
LMV822IDRIC OPAMP GP 2 CIRCUIT 8SOIC |
1,484 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.9V/µs | 5.5 MHz | - | 40 nA | 1 mV | 500µA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LPV321DCKRIC OPAMP GP 1 CIRCUIT SC70-5 |
4,686 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 237 kHz | - | 2 nA | 1.5 mV | 9µA | 72 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
