Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TL088CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
850 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 18V/µs | 3 MHz | - | 30 pA | 100 µV | 2.6mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA2244PAIC OPAMP GP 2 CIRCUIT 8DIP |
4,034 | - |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.1V/µs | 430 kHz | - | 10 nA | 700 µV | 40µA (x2 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLC274CNSRIC OPAMP GP 4 CIRCUIT 14SO |
215 | - |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
TLV2783IDGSIC OPAMP GP 2 CIRCUIT 10VSSOP |
4,268 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
TLV341AIDCKTIC OPAMP GP 1 CIRCUIT SC70-6 |
975 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 2.3 MHz | - | 1 pA | 300 µV | 75µA | 115 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
TLV2450CPIC OPAMP GP 1 CIRCUIT 8DIP |
2,175 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
THS4222DGKRIC OPAMP VFB 2 CIRCUIT 8VSSOP |
1,801 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 990V/µs | 120 MHz | 230 MHz | 900 nA | 3 mV | 14mA (x2 Channels) | 100 mA | 2.7 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2463AINIC OPAMP GP 2 CIRCUIT 14DIP |
1,480 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
TLV2375INIC OPAMP GP 4 CIRCUIT 16DIP |
4,998 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA (x4 Channels) | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 16-PDIP |
|
TLC2652C-14DIC OPAMP ZER-DRIFT 1CIRC 14SOIC |
7,600 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 2.8V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
