Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2221IDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,100 | - |
|
Datasheet | LinCMOS™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.18V/µs | 510 kHz | - | 1 pA | 610 µV | 110µA | 50 mA | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLV27L1IDIC OPAMP GP 1 CIRCUIT 8SOIC |
187 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.06V/µs | 160 kHz | - | 1 pA | 500 µV | 7µA | 400 µA | 2.7 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2460AQPWRG4Q1IC OPAMP GP 1 CIRCUIT 8TSSOP |
1,437 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-TSSOP |
|
LF298MIC SAMPL/HOLD 1 CIRCUIT 14SOIC |
4,309 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Sample and Hold | 1 | - | - | - | - | 5 nA | 1 mV | 4.5mA | - | 10 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC272BIDIC CMOS 2 CIRCUIT 8SOIC |
3,851 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 290 µV | 1.4mA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLV2761IDBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,188 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LM6132BINIC OPAMP GP 2 CIRCUIT 8DIP |
4,233 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x2 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLV4113IDIC OPAMP GP 2 CIRCUIT 14SOIC |
3,241 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 1.57V/µs | 2.7 MHz | - | 0.3 pA | 175 µV | 700µA (x2 Channels) | 320 mA | 2.5 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
THS4221DGKIC OPAMP VFB 1 CIRCUIT 8VSSOP |
2,505 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 990V/µs | 120 MHz | 230 MHz | 900 nA | 3 mV | 14mA | 100 mA | 2.7 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
THS4051CDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,801 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 240V/µs | - | 70 MHz | 2.5 µA | 2.5 mV | 8.5mA | 100 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
