Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2662IDWIC OPAMP GP 2 CIRCUIT 16SOIC |
1,300 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | General Purpose | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 3.5 V | 15 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
TLV2460CPIC OPAMP GP 1 CIRCUIT 8DIP |
4,805 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TLV2460IPIC OPAMP GP 1 CIRCUIT 8DIP |
3,062 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
TLV342IDIC CMOS 2 CIRCUIT 8SOIC |
1,403 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 1V/µs | 2.3 MHz | - | 1 pA | 300 µV | 75µA (x2 Channels) | 115 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6035IMQ1IC CMOS 2 CIRCUIT 8SOIC |
3,895 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.4 MHz | - | 0.02 pA | 500 µV | 650µA (x2 Channels) | 8 mA | 2 V | 15.5 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLC271BCPIC OPAMP GP 1 CIRCUIT 8DIP |
4,299 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 390 µV | 950µA | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TLV2762IPIC OPAMP GP 2 CIRCUIT 8DIP |
1,290 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x2 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2453CDGSIC OPAMP GP 2 CIRCUIT 10VSSOP |
1,766 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x2 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 10-VSSOP |
|
|
OPA137PIC OPAMP GP 1 CIRCUIT 8DIP |
3,960 | - |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2473CDGQIC CMOS 2 CIRCUIT 10HVSSOP |
2,632 | - |
|
Datasheet | - | 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x2 Channels) | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-HVSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
