Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2771AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
1,053 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 500 µV | 1mA | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TLC2654C-8DIC OPAMP GP 1 CIRCUIT 8SOIC |
2,076 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 3.7V/µs | 1.9 MHz | - | 50 pA | 5 µV | 1.5mA | 50 mA | 4.6 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2365AIDG4IC CMOS 2 CIRCUIT 8SOIC |
509 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 25V/µs | 50 MHz | - | 0.2 pA | 100 µV | 4.6mA (x2 Channels) | 65 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LM7322QMA/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
260 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 18V/µs | 20 MHz | - | 1.1 µA | 700 µV | 2.5mA (x2 Channels) | 100 mA | 2.5 V | 32 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLC252BCPIC CMOS 2 CIRCUIT 8DIP |
2,222 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 2 | - | 2.9V/µs | 2.2 MHz | - | 0.6 pA | 290 µV | 1.9mA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
TLC25M2ACDIC CMOS 2 CIRCUIT 8SOIC |
3,881 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Open Drain | 2.9V/µs | 1.7 MHz | - | 0.7 pA | 900 µV | 285µA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLC25L2ACDIC CMOS 2 CIRCUIT 8SOIC |
3,738 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Single-Ended | 2.9V/µs | 110 kHz | - | 50 pA | 900 µV | 29µA (x2 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LMC6062AIM/NOPBIC CMOS 2 CIRCUIT 8SOIC |
498 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 40µA (x2 Channels) | 35 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
TLE2022AIDIC OPAMP GP 2 CIRCUIT 8SOIC |
105 | - |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 33 nA | 120 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA703UA/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
3,040 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 1 pA | 160 µV | 160µA | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
