Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMV321IDBVRG4IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,807 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 130µA | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LM2902NSRIC OPAMP GP 4 CIRCUIT 14SO |
1,512 | - |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SO |
|
LM358DRE4IC OPAMP GP 2 CIRCUIT 8SOIC |
3,817 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LM358DRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,571 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA348AIDRG4IC OPAMP GP 1 CIRCUIT 8SOIC |
2,403 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | 45µA | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMV341IDBVRE4IC OPAMP GP 1 CIRCUIT SOT23-6 |
1,302 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 250 µV | 107µA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
LMV341IDBVRG4IC OPAMP GP 1 CIRCUIT SOT23-6 |
2,304 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 250 µV | 107µA | 113 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
TL062IPWRG4IC OPAMP JFET 2 CIRCUIT 8TSSOP |
4,965 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | 20 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
|
TL103WIDRG4IC OPAMP GP 2 CIRCUIT 8SOIC |
3,928 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 2 | - | 0.4V/µs | 900 kHz | - | 20 nA | 1 mV | 700µA (x2 Channels) | 40 mA | 3 V | 32 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
TL082IPG4IC OPAMP JFET 2 CIRCUIT 8DIP |
1,016 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 10 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
