Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC274CDBG4IC OPAMP GP 4 CIRCUIT 14SSOP |
3,984 | - |
|
Datasheet | - | 14-SSOP (0.209", 5.30mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SSOP |
|
LF411CDIC OPAMP JFET 1 CIRCUIT 8SOIC |
3,905 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 13V/µs | 3 MHz | - | 50 pA | 800 µV | 2mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLV341AIDCKTG4IC OPAMP GP 1 CIRCUIT SC70-6 |
3,882 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1V/µs | 2.3 MHz | - | 1 pA | 300 µV | 75µA | 115 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
TLC2262CDG4IC CMOS 2 CIRCUIT 8SOIC |
3,217 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 425µA (x2 Channels) | 50 mA | 4.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMV794 MDAIC OPAMP GP 2 CIRCUIT DIE |
4,887 | - |
|
Datasheet | LMV® | Die | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 35V/µs | 88 MHz | - | 0.1 pA | 100 µV | 1.3mA (x2 Channels) | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | Die |
|
|
LMP7717MA/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
3,985 | - |
|
Datasheet | LMP®, PowerWise® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 35V/µs | 88 MHz | - | 0.1 pA | 10 µV | 1.15mA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6645MFXIC OPAMP VFB 1 CIRCUIT SOT23-5 |
3,120 | - |
|
Datasheet | VIP10™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC27L4BIDG4IC CMOS 4 CIRCUIT 14SOIC |
2,647 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
TL081BCDIC OPAMP JFET 1 CIRCUIT 8SOIC |
4,429 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 13V/µs | 3 MHz | - | 30 pA | 2 mV | 1.4mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TL082CMXIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,874 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | 17 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
