Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.jpg "OPA569AIDWP")
|
OPA569AIDWPIC OPAMP GP 1 CIRCUIT 20HSOIC |
2,308 | - |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1.2 MHz | - | 1 pA | 500 µV | 9mA | 2.4 A | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOIC |
|
INA129UIC INST AMP 1 CIRCUIT 8SOIC |
654 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 10 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4350UA/2K5IC CMOS 4 CIRCUIT 14SOIC |
1,250 | - |
|
Datasheet | MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x4 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS3201DBVTIC OPAMP CFA 1 CIRCUIT SOT23-5 |
1,010 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
THS3095DDARIC OPAMP CFA 1 CIRC 8SOPWRPAD |
2,952 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 7300V/µs | - | 235 MHz | 4 µA | 900 µV | 9.5mA | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
OPA4277UA/2K5IC OPAMP GP 4 CIRCUIT 14SOIC |
2,589 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | - | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
.jpg "LOG114AIRGVR")
|
LOG114AIRGVRIC LOGARITHMIC 1 CIRCUIT 16VQFN |
2,269 | - |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Logarithmic | 1 | - | 5V/µs | 15 MHz | 5 MHz | 5 pA | 100 µV | 10mA | - | 4.8 V | 11 V | -5°C ~ 75°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
INA128PAIC INST AMP 1 CIRCUIT 8DIP |
2,824 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA4140AIPWRIC OPAMP JFET 4 CIRCUIT 14TSSOP |
4,133 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
RCV420JPIC OPAMP GP 1 CIRCUIT 16DIP |
448 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 1.5V/µs | 150 kHz | - | - | 1 mV | 3mA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
