Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6646MAIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,187 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA (x2 Channels) | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC6442INIC OPAMP GP 2 CIRCUIT 8DIP |
1,182 | - |
|
Datasheet | LMC® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.0041V/µs | 10.5 kHz | - | 0.005 pA | 1.5 mV | 1.9µA (x2 Channels) | 2.1 mA | 1.8 V | 11 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
|
TLC2272AMDIC CMOS 2 CIRCUIT 8SOIC |
2,140 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM614 MDCIC OPAMP GP 4 CIRCUIT DIE |
3,350 | - |
|
Datasheet | - | Die | Tube | Active | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 1.5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | Die |
|
TLV2231CDBVRIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,289 | - |
|
Datasheet | LinCMOS™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 2 MHz | - | 1 pA | 710 µV | 850µA | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | SOT-23-5 |
|
LMC8101MMX/NOPBIC OPAMP GP 1 CIRCUIT 8VSSOP |
3,395 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1.3 MHz | - | 1 pA | 700 µV | 1.1mA | - | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLV2474CDRG4IC CMOS 4 CIRCUIT 14SOIC |
1,866 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
TLV2252AIDG4IC OPAMP GP 2 CIRCUIT 8SOIC |
1,572 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2252AIPWG4IC OPAMP GP 2 CIRCUIT 8TSSOP |
1,264 | - |
|
Datasheet | LinCMOS™ | 8-TSSOP (0.173", 4.40mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP |
|
|
LMH6724MAIC OPAMP CFA 2 CIRCUIT 8SOIC |
4,604 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA (x2 Channels) | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
