Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6624 MDCIC OPAMP VFB 1 CIRCUIT DIESALE |
2,052 | - |
|
Datasheet | - | Die | Tube | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | Diesale |
|
OPA241PAG4IC OPAMP GP 1 CIRCUIT 8DIP |
4,140 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 0.01V/µs | 35 kHz | - | 4 nA | 100 µV | 27µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLV2773IDGSG4IC CMOS 2 CIRCUIT 10VSSOP |
4,122 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
ONET8551TYS4IC TRANSIMPEDANCE 1 CIRC WAFER |
3,193 | - |
|
Datasheet | - | Die | Tube | Active | Transimpedance | 1 | - | - | - | 9 GHz | - | - | 28mA | - | 2.8 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | Wafer |
|
|
ONET8551TYS9IC TRANSIMPEDANCE 1 CIRC WAFER |
2,597 | - |
|
Datasheet | - | Die | Tube | Active | Transimpedance | 1 | - | - | - | 9 GHz | - | - | 28mA | - | 2.8 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | Wafer |
|
LM7301IM/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
2,409 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.25V/µs | 4 MHz | - | 103 nA | 40 µV | 720µA | - | 1.8 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4342EA/2K5IC CMOS 4 CIRCUIT 14TSSOP |
3,254 | - |
|
Datasheet | MicroAmplifier™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.2 pA | 1 mV | 150µA (x4 Channels) | 15 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
LM6134BIMXIC OPAMP GP 4 CIRCUIT 14SOIC |
4,041 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x4 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ONET4201PARGTTG4IC LIMITING 1 CIRCUIT 16VQFN |
1,446 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | Limiting | 1 | Differential | - | - | 25 kHz | - | - | 35mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
TLV2252QDRQ1IC OPAMP GP 2 CIRCUIT 8SOIC |
2,105 | - |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 70µA (x2 Channels) | 50 mA | 2.7 V | 8 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
