Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA445APIC OPAMP GP 1 CIRCUIT 8DIP |
508 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 15V/µs | 2 MHz | - | 10 pA | 1.5 mV | 4.2mA | 15 mA | 20 V | 90 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS7002IPWPIC OPAMP PGA 2 CIRCUIT 28HTSSOP |
153 | - |
|
Datasheet | - | 28-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | Programmable Gain | 2 | - | 85V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 5mA | 95 mA | 9 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-HTSSOP |
|
OPA2132UIC OPAMP JFET 2 CIRCUIT 8SOIC |
627 | - |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
INA141U/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,889 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 4V/µs | - | 1 MHz | 2 nA | 20 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4500IDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
140 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 4 mV | 23mA | 120 mA | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA547FKTWTIC OPAMP GP 1 CIRC DDPAK/TO263-7 |
1,305 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
THS3491IRGTTIC OPAMP CFA 1 CIRCUIT 16VQFN |
1,960 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 8000V/µs | 900 MHz | - | 4 µA | 1 mV | 16.8mA | 620 mA | 14 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
INA118U/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,437 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.9V/µs | - | 800 kHz | 1 nA | 25 µV | 350µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2128UAIC INST AMP 2 CIRCUIT 16SOIC |
1,141 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 10 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
INA114BPIC INST AMP 1 CIRCUIT 8DIP |
325 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.6V/µs | - | 1 MHz | 500 pA | 10 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
