Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMP2234AMT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,470 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 36µA (x4 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
OPA2889IDGSTG4IC OPAMP VFB 2 CIRCUIT 10VSSOP |
3,489 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 250V/µs | 75 MHz | 115 MHz | 150 nA | 1.5 mV | 920µA (x2 Channels) | 60 mA | 2.6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
ONET8541TYIC TRANSIMPEDANCE 1CIRC 0DIESALE |
2,226 | - |
|
Datasheet | - | Die | Bulk | Active | Transimpedance | 1 | Differential | - | - | 9 GHz | - | - | 27mA | - | 2.97 V | 3.63 V | -40°C ~ 100°C | - | - | Surface Mount | 0-DIESALE |
|
OPA2684IDCNRIC OPAMP CFA 2 CIRCUIT SOT23-8 |
4,936 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 780V/µs | 1.9 GHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA (x2 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
|
OPA2684IDCNRG4IC OPAMP CFA 2 CIRCUIT SOT23-8 |
1,002 | - |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 780V/µs | 1.9 GHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA (x2 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-8 |
|
TLV2474CPWPRIC CMOS 4 CIRCUIT 14HTSSOP |
1,408 | - |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-HTSSOP |
|
OPA2340EA/250G4IC CMOS 2 CIRCUIT 8VSSOP |
1,456 | - |
|
Datasheet | microPOWER™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
LMP8480MMX-T/NOPBIC CURR SENSE 1 CIRCUIT 8VSSOP |
1,099 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
INA212CIRSWTIC CURR SENSE 1 CIRCUIT 10UQFN |
1,446 | - |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Single-Ended | 0.4V/µs | 4 kHz | - | 28 µA | 0.55 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
LMC6042AINIC CMOS 2 CIRCUIT 8DIP |
2,932 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
