Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA521IRGWRIC OPAMP GP 1 CIRCUIT 20VQFN |
4,608 | - |
|
Datasheet | - | 20-VQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Single-Ended | 75V/µs | 3.82 MHz | - | - | - | 78mA | 2.5 A | 7 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | 20-VQFN (5x5) |
|
TLC4502AIDRIC CMOS 2 CIRCUIT 8SOIC |
3,611 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
THS4011CDGNRG4IC OPAMP VFB 1 CIRCUIT 8HVSSOP |
4,323 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 1 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4011IDGNRG4IC OPAMP VFB 1 CIRCUIT 8HVSSOP |
2,923 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 1 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
TLC27M9IDRIC CMOS 4 CIRCUIT 14SOIC |
1,460 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.62V/µs | 525 kHz | - | 0.7 pA | 220 µV | 570µA (x4 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA690IDG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,540 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 1800V/µs | 300 MHz | 500 MHz | 3 µA | 1 mV | 5.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2683IDGSTG4IC OPAMP CFA 2 CIRCUIT 10VSSOP |
4,206 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Current Feedback | 2 | Differential | 540V/µs | 200 MHz | - | 3 µA | 1.5 mV | 1.88mA (x2 Channels) | 150 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
|
TL054CDE4IC OPAMP JFET 4 CIRCUIT 14SOIC |
2,779 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 560 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LM6211MFX/NOPBIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,409 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 5.6V/µs | 20 MHz | - | 2 pA | 250 µV | 1.05mA | 38 mA | 5 V | 24 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6626MMX/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
3,430 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA (x2 Channels) | 80 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
