Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA118UB/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,169 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.9V/µs | - | 800 kHz | 1 nA | 10 µV | 350µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LOG112AIDIC LOG/LOG 1 CIRCUIT 14SOIC |
113 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | 1.4 MHz | 45 kHz | 5 pA | 300 µV | 1.25mA | 18 mA | 9 V | 36 V | -5°C ~ 75°C | - | - | Surface Mount | 14-SOIC |
|
INA2128UIC INST AMP 2 CIRCUIT 16SOIC |
540 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 25 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM101AH/NOPBIC OPAMP GP 1 CIRCUIT TO99-8 |
1,488 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 30 nA | 700 µV | 1.8mA | - | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OPA548FKTWTIC POWER 1 CIRCUIT DDPAK/TO263-7 |
1,385 | - |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | Power | 1 | - | 10V/µs | 1 MHz | - | 100 nA | 2 mV | 17mA | 5 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
OPA544FKTTTIC POWER 1 CIRCUIT DDPAK/TO263-5 |
980 | - |
|
Datasheet | - | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tape & Reel (TR) | Active | Power | 1 | - | 8V/µs | 1.4 MHz | - | 15 pA | 1 mV | 12mA | 2 A | 20 V | 70 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
ISO124U/1KIC OPAMP ISOLATION 1 CIRC 8SOIC |
346 | - |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tape & Reel (TR) | Active | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA462IDDAIC OPAMP GP 1 CIRC 8SOPWRPAD |
586 | - |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 25V/µs | 6.5 MHz | - | 1.4 pA | 200 µV | 3.2mA | 30 mA | 12 V | 180 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
PGA204BUIC INST AMP 1 CIRCUIT 16SOIC |
441 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 1 MHz | 500 pA | 10 µV | 5.2mA | 23 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
INA118UBIC INST AMP 1 CIRCUIT 8SOIC |
1,217 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 0.9V/µs | - | 800 kHz | 1 nA | 10 µV | 350µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
