Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6502MTX/NOPBIC VARIABLE GAIN 1 CIRC 14TSSOP |
4,524 | - |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 1 | - | 1800V/µs | - | 130 MHz | 9 µA | - | 27mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
TLV2254QDREPIC OPAMP GP 4 CIRCUIT 14SOIC |
3,796 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 68µA (x2 Channels) | 50 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
OPA2695IRGTRIC OPAMP CFA 2 CIRCUIT 16VQFN |
2,519 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 2 | Differential | 2900V/µs | 1.1 GHz | 1.1 GHz | 20 µA | 300 µV | 25.8mA (x2 Channels) | 120 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
OPA4350EA/2K5IC CMOS 4 CIRCUIT 16SSOP |
2,140 | - |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x4 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
OPA847IDBVTG4IC OPAMP VFB 1 CIRCUIT SOT23-6 |
3,999 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 950V/µs | 3.9 GHz | - | 19 µA | 100 µV | 18.1mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LMP8640MKE-F/NOPBIC CURR SENSE 1CIRC SOT23-THIN |
2,440 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 1.8V/µs | 450 kHz | - | 13 µA | 900 µV | 2.3mA | - | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
TLE2022CPE4DUAL PRECISION LOW-POWER SINGLE |
1,380 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Push-Pull | 0.65V/µs | 2.8 MHz | - | 35 nA | 150 µV | 550µA | 30 mA | 4 V | 40 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Through Hole | 8-PDIP |
|
THS4082IDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,281 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA (x2 Channels) | 85 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4504DRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,477 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 1800V/µs | 210 MHz | 260 MHz | 4 µA | 4 mV | 16mA | - | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
V62/21612-01XEENHANCED PRODUCT, 40-V, BIDIRECT |
1,537 | - |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Current Sense | 1 | Single Ended, Rail-to-Rail | 1V/µs | - | 87 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -55°C ~ 150°C (TA) | - | - | Surface Mount | TSOT-23-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
