Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSM9634HEUK+TIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,590 | - |
|
Datasheet | - | SC-74A, SOT-753 | Cut Tape (CT) | Obsolete | Current Sense | 1 | - | - | - | - | - | 100 µV | 1.1µA | - | 1.6 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TSM9634FEUK+TIC CURR SENSE 1 CIRCUIT SOT23-5 |
5,585 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | - | - | 100 µV | 1.1µA | - | 1.6 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TSM9634WEUK+TIC CURR SENSE 1 CIRCUIT SOT23-5 |
3,181 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | - | - | 100 µV | 1.1µA | - | 1.6 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TS1103-200EG6TIC CURR SENSE 1 CIRCUIT SOT23-6 |
1,422 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Current Sense | 1 | - | - | - | 4.5 kHz | - | 30 µV | 680nA | - | 2 V | 25 V | -40°C ~ 105°C | - | - | Surface Mount | SOT-23-6 |
|
TS1002IM8TIC OPAMP GP 4KHZ RRO 8MSOP |
3,125 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.0015V/µs | 4 kHz | - | 25 pA | 500 µV | 1.2µA (x2 Channels) | 1.5 mA | 0.65 V | 2.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
TS1004IT14TIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,791 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.0015V/µs | 4 kHz | - | 25 pA | 500 µV | 2.4µA (x4 Channels) | 1.5 mA | 0.65 V | 2.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
TS12012ITD1022TIC OPAMP GP 1 CIRCUIT 10TDFN |
5,350 | - |
|
Datasheet | - | 10-UFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Open Drain | 0.006V/µs | 15 kHz | - | 20 nA | 3.5 mV | 1.1µA | 1.4 mA | 0.8 V | 2.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-TDFN (2x2) |
|
|
TS12011ITD1022TIC OPAMP GP 1 CIRCUIT 10TDFN |
5,254 | - |
|
Datasheet | - | 10-UFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Push-Pull | 0.006V/µs | 15 kHz | - | 20 nA | 3.5 mV | 1.1µA | 500 µA | 0.8 V | 2.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-TDFN (2x2) |
|
|
TS1103-100EG6TIC OPAMP CUR SENS 4.5KHZ SOT23-6 |
4,126 | - |
|
Datasheet | - | SOT-23-6 | Cut Tape (CT) | Obsolete | Current Sense | 1 | - | - | - | 4.5 kHz | - | 30 µV | 680nA | - | 2 V | 25 V | -40°C ~ 105°C | - | - | Surface Mount | SOT-23-6 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
