Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TSV611AILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 | - |
|
Datasheet | TSV61xA | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.04V/µs | 120 kHz | - | 1 pA | 800 µV | 10.5µA | 63 mA | 1.5 V | 5.5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
TL084IDRIC OPAMP JFET 4 CIRCUIT 14SOIC |
2,500 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Single-Ended | 16V/µs | 4 MHz | - | - | 3 mV | 1.4mA (x4 Channels) | 50 mA | - | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOP |
|
OPA348AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | 45µA | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
LMV612MAXIC OPAMP GP 2 CIRCUIT 8SOIC |
2,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 15 nA | 1 mV | 103µA (x2 Channels) | 9 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOP |
|
|
OP07CSZIC OPAMP GP 1 CIRCUIT 8SOIC |
2,490 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | Standard | 1 | Push-Pull | - | 500 kHz | - | 28 nA | 150 µV | 3.8mA | - | 6 V | 40 V | -10°C ~ 85°C | - | - | Surface Mount | 8-SOP |
|
|
OPA2348AIDIC CMOS 2 CIRCUIT 8SOIC |
2,490 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Cut Tape (CT) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | 45µA (x2 Channels) | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
AD8541ARZIC OPAMP GP 1 CIRCUIT 8SOIC |
2,500 | - |
|
Datasheet | AD854xA | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.8V/µs | 1.1 MHz | - | 1 pA | 500 µV | 85µA | 40 mA | 2.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOP |
|
|
AD8541ARTZIC OPAMP GP 1 CIRCUIT SOT23-5 |
2,284 | - |
|
Datasheet | AD854xA | SC-74A, SOT-753 | Cut Tape (CT) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.8V/µs | 1.1 MHz | - | 1 pA | 500 µV | 85µA | 40 mA | 2.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
AD8631ARTZIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 | - |
|
Datasheet | AD863xA | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 4V/µs | 6.5 MHz | - | 1 pA | 800 µV | 480µA | 40 mA | 2.3 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
LMV611MGIC OPAMP GP 1 CIRCUIT SC70-5 |
3,000 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 15 nA | 1 mV | 103µA | 9 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
