Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL5163IW-T7AIC OPAMP CFA 1 CIRCUIT SOT23-5 |
39,610 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Current Feedback | 1 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
EL5300IUIC OPAMP VFB 3 CIRCUIT 16QSOP |
25,474 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 3 | - | 2200V/µs | - | 200 MHz | 2 µA | 1 mV | 2.5mA (x3 Channels) | 100 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
EL5144CWZ-T7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
6,817 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 25 mV | 7mA | 120 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
EL5144CW-T7AIC OPAMP VFB 1 CIRCUIT SOT23-5 |
2,998 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 25 mV | 7mA | 120 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
EL5144CWZ-T7AIC OPAMP VFB 1 CIRCUIT SOT23-5 |
1,750 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 60 MHz | 100 MHz | 2 nA | 25 mV | 7mA | 120 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
EL2257CN-02IC OPAMP GP 2 CIRCUIT 14DIP |
857 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 300V/µs | 60 MHz | 150 MHz | 5.5 µA | 4 mV | 5mA (x2 Channels) | 100 mA | 2.7 V | 12 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 14-PDIP |
|
|
EL5367IUZIC OPAMP CFA 3 CIRCUIT 16QSOP |
25,193 | - |
|
Datasheet | EL5367 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | Push-Pull | 6000V/µs | - | 1 GHz | - | 5 mV | 8.5mA (x3 Channels) | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
EL5367IUIC OPAMP CFA 1 CIRCUIT 16QSOP |
13,224 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 6000V/µs | 800 MHz | 1 GHz | 8.5 µA | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
EL5306ISIC OPAMP GP 3 CIRCUIT 16SOIC |
4,874 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 3 | - | 4500V/µs | - | 380 MHz | 1.5 µA | 15 mV | 1.5mA (x3 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
EL5360IUIC OPAMP CFA 3 CIRCUIT 16QSOP |
1,572 | - |
|
Datasheet | EL5360 | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 1700V/µs | - | 200 MHz | 4 µA | 1.6 mV | 750µA (x3 Channels) | 70 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
