Welcome to Winsun (HK) Electronics Limited!
+86-(0755)8253 3846
EXPLORE COMPONENTS

Instrumentation, Op Amps, Buffer Amps

Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.

For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.

Compare Part Numbers Review available models and manufacturers
Datasheets & Specifications Access technical references quickly
RFQ & BOM Support Send quantities for sourcing and quotation
Photo Mfr. Part # Availability Price Quantity Datasheet Series Package/Case Packaging Product Status Amplifier Type Number of Circuits Output Type Slew Rate Gain Bandwidth Product -3db Bandwidth Current - Input Bias Voltage - Input Offset Current - Supply Current - Output / Channel Voltage - Supply Span (Min) Voltage - Supply Span (Max) Operating Temperature Grade Qualification Mounting Type Supplier Device Package
AS348W5-7 Diodes Incorporated

AS348W5-7

OPAMP GENERAL PURPOSE SOT25 T&R

Diodes Incorporated

2,676 -
Datasheet - SC-74A, SOT-753 Tape & Reel (TR) Active CMOS 1 Push-Pull, Rail-to-Rail 0.45V/µs 1 MHz - 1 pA 500 µV 70µA 185 mA 1.6 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount SOT-25
LM2904A-TS1R-S 3PEAK

LM2904A-TS1R-S

IC OPAMP 2 CIRCUIT 8-TSSOP

3PEAK

3,000 -
Datasheet LM2902A 8-TSSOP (0.173", 4.40mm Width) Tape & Reel (TR) Active Standard 2 Single Ended, Rail-to-Rail 0.5V/µs 900 kHz - 60 pA 100 µV 110µA (x2 Channels) 30 mA 3 V 36 V -40°C ~ 125°C Automotive AEC-Q100 Surface Mount 8-TSSOP
TP1562AL1-VS1R-S 3PEAK

TP1562AL1-VS1R-S

IC OPAMP 2 CIRCUIT 8-MSOP

3PEAK

3,000 -
Datasheet TP156XAL1 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Tape & Reel (TR) Active Standard 2 Single Ended, Rail-to-Rail 4.5V/µs 6 MHz - 1 pA 1 mV 600µA (x2 Channels) 100 mA 2.5 V 6 V -40°C ~ 125°C Automotive AEC-Q100 Surface Mount 8-MSOP
TPH2502-VR 3PEAK

TPH2502-VR

IC OPAMP 2 CIRCUIT 8-MSOP

3PEAK

2,757 -
Datasheet - 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Tape & Reel (TR) Active Standard 2 Single Ended, Rail-to-Rail 200V/µs 120 MHz 250 MHz 3 pA 2 mV 6.5mA (x2 Channels) 290 mA 2.5 V 5.5 V -40°C ~ 125°C - - Surface Mount 8-MSOP
AS358AMTR-G1 Diodes Incorporated

AS358AMTR-G1

IC OPAMP GP 2 CIRCUIT 8SOIC

Diodes Incorporated

3,870 -
Datasheet - 8-SOIC (0.154", 3.90mm Width) Tape & Reel (TR) Active General Purpose 2 - - - - 20 nA 2 mV 700µA (x2 Channels) 40 mA 3 V 36 V -40°C ~ 85°C (TA) - - Surface Mount 8-SOIC
INA181A4QDCKRQ1 Texas Instruments

INA181A4QDCKRQ1

AEC-Q100, 26V, BI-DIRECTIONAL, 3

Texas Instruments

2,965 -
Datasheet - 6-TSSOP, SC-88, SOT-363 Tape & Reel (TR) Active Current Sense 1 Single Ended, Rail-to-Rail 2V/µs - 105 kHz 75 µA 100 µV 195µA 8 mA 2.7 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SC-70-6
INA181A1QDCKRQ1 Texas Instruments

INA181A1QDCKRQ1

AEC-Q100, 26V, BI-DIRECTIONAL, 3

Texas Instruments

2,935 -
Datasheet - 6-TSSOP, SC-88, SOT-363 Tape & Reel (TR) Active Current Sense 1 Single Ended, Rail-to-Rail 2V/µs - 350 kHz 75 µA 100 µV 195µA 8 mA 2.7 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SC-70-6
INA181A3QDCKRQ1 Texas Instruments

INA181A3QDCKRQ1

AEC-Q100, 26V, BI-DIRECTIONAL, 3

Texas Instruments

2,870 -
Datasheet - 6-TSSOP, SC-88, SOT-363 Tape & Reel (TR) Active Current Sense 1 Single Ended, Rail-to-Rail 2V/µs - 150 kHz 75 µA 100 µV 195µA 8 mA 2.7 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SC-70-6
INA181A2QDCKRQ1 Texas Instruments

INA181A2QDCKRQ1

AEC-Q100, 26V, BI-DIRECTIONAL, 3

Texas Instruments

2,687 -
Datasheet - 6-TSSOP, SC-88, SOT-363 Tape & Reel (TR) Active Current Sense 1 Single Ended, Rail-to-Rail 2V/µs - 210 kHz 75 µA 100 µV 195µA 8 mA 2.7 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SC-70-6
LMV321AUQDBVRQ1 Texas Instruments

LMV321AUQDBVRQ1

AUTOMOTIVE, SINGLE-CHANNEL, 5.5-

Texas Instruments

2,812 -
Datasheet - SC-74A, SOT-753 Tape & Reel (TR) Active Standard 1 Push-Pull, Rail-to-Rail 1.7V/µs 1 MHz - 10 pA 1 mV 70µA 40 mA 2.5 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SOT-23-5
LMV321AQDBVRQ1 Texas Instruments

LMV321AQDBVRQ1

AUTOMOTIVE, SINGLE-CHANNEL, 5.5-

Texas Instruments

1,873 -
Datasheet - SC-74A, SOT-753 Tape & Reel (TR) Active Standard 1 Push-Pull, Rail-to-Rail 1.7V/µs 1 MHz - 10 pA 1 mV 70µA 40 mA 2.5 V 5.5 V -40°C ~ 125°C (TA) Automotive AEC-Q100 Surface Mount SOT-23-5
TP1242L1-SR 3PEAK

TP1242L1-SR

IC OPAMP 2 CIRCUIT 8-SOP

3PEAK

3,980 -
Datasheet TP124X 8-SOIC (0.154", 3.90mm Width) Tape & Reel (TR) Active Standard 2 Single Ended, Rail-to-Rail 0.7V/µs 1 MHz - 25 pA 50 µV 150µA (x2 Channels) 70 mA 4.5 V 36 V -40°C ~ 125°C - - Surface Mount 8-SOP
TP1242L1-VR 3PEAK

TP1242L1-VR

IC OPAMP 2 CIRCUIT 8-MSOP

3PEAK

2,985 -
Datasheet TP124X 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Tape & Reel (TR) Active Standard 2 Single Ended, Rail-to-Rail 0.7V/µs 1 MHz - 25 pA 50 µV 150µA (x2 Channels) 70 mA 4.5 V 36 V -40°C ~ 125°C - - Surface Mount 8-MSOP
MCP6496T-E/LT Microchip Technology

MCP6496T-E/LT

SINGLE, 30MHZ OP AMP, E TEMP

Microchip Technology

2,358 -
Datasheet - 5-TSSOP, SC-70-5, SOT-353 Tape & Reel (TR) Active General Purpose 1 Rail-to-Rail 40V/µs 30 MHz - 1 pA 1.6 mV 2mA 55 mA 1.8 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount SC-70-5
MCP6496RT-E/OT Microchip Technology

MCP6496RT-E/OT

SINGLE, 30MHZ OP AMP, E TEMP

Microchip Technology

2,275 -
Datasheet - SC-74A, SOT-753 Tape & Reel (TR) Active General Purpose 1 Rail-to-Rail 40V/µs 30 MHz - 1 pA 1.6 mV 2mA 55 mA 1.8 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount SOT-23-5
LM224KAN Texas Instruments

LM224KAN

IC OPAMP GP 4 CIRCUIT 14DIP

Texas Instruments

1,381 -
Datasheet - 14-DIP (0.300", 7.62mm) Tube Active General Purpose 4 - 0.5V/µs 1.2 MHz - 15 nA 2 mV 1.4mA (x4 Channels) 30 mA 3 V 30 V -25°C ~ 85°C (TA) - - Through Hole 14-PDIP
MCP6496UT-E/OT Microchip Technology

MCP6496UT-E/OT

SINGLE, 30MHZ OP AMP, E TEMP

Microchip Technology

1,135 -
Datasheet - SC-74A, SOT-753 Tape & Reel (TR) Active General Purpose 1 Rail-to-Rail 40V/µs 30 MHz - 1 pA 1.6 mV 2mA 55 mA 1.8 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount SOT-23-5
LM224KN Texas Instruments

LM224KN

IC OPAMP GP 4 CIRCUIT 14DIP

Texas Instruments

1,089 -
Datasheet - 14-DIP (0.300", 7.62mm) Tube Active General Purpose 4 - 0.5V/µs 1.2 MHz - 20 nA 3 mV 1.4mA (x4 Channels) 30 mA 3 V 30 V -25°C ~ 85°C (TA) - - Through Hole 14-PDIP
INA350ABSIRUGR Texas Instruments

INA350ABSIRUGR

LOW-POWER (100 UA) SELECTABLE-GA

Texas Instruments

2,859 -
Datasheet - 10-XFQFN Tape & Reel (TR) Active - 1 Single-Ended 0.24V/µs 100 kHz 25 kHz 0.65 pA 200 µV 100µA 20 mA 1.8 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount 10-X2QFN (2x1.5)
INA350CDSIRUGR Texas Instruments

INA350CDSIRUGR

LOW-POWER (100 UA) SELECTABLE-GA

Texas Instruments

2,674 -
Datasheet - 10-XFQFN Tape & Reel (TR) Active - 1 Single-Ended 0.24V/µs 100 kHz 25 kHz 0.65 pA 200 µV 100µA 20 mA 1.8 V 5.5 V -40°C ~ 125°C (TA) - - Surface Mount 10-X2QFN (2x1.5)
Total 29642 Record«Prev1... 473474475476477478479480...1483Next»
WINSUN SOURCING SUPPORT

Need Instrumentation, Op Amps, Buffer Amps Sourcing Support?

Send the manufacturer, part number, quantity and target delivery requirement. Winsun (HK) Electronics can assist with availability checks, quotation support, shortage sourcing and hard-to-find or obsolete components.

Global component sourcing support BOM, shortage and EOL support
FREQUENTLY ASKED QUESTIONS

Instrumentation, Op Amps, Buffer Amps FAQ

Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.

What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?

Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.

Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?

Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.

Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?

Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.

How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?

Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.