Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP6294IPWRIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,824 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 1 pA | 300 µV | 600µA (x4 Channels) | 25 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
MCP60721T-E/OTSINGLE, 10MHZ OP AMP, E TEMP |
3,350 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 15V/µs | 10 MHz | - | 0.4 pA | 25 µV | 720µA | 57 mA | 2.2 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
REAC1251GSP#GC0LEGACY LIC LEGACY MSOP OPERATION |
2,500 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TLC272BIPIC CMOS 2 CIRCUIT 8DIP |
990 | - |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 290 µV | 1.4mA (x2 Channels) | 30 mA | 4 V | 16 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
UPC1251G2-E2-ALINEAR IC |
2,494 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
UPC4094G2-E2-ALINEAR IC |
1,622 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
UPC4574GR-9LG-E1-ALINEAR IC |
4,659 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
BD12730G-GTRIC OPAMP GP 1 CIRCUIT 5SSOP |
2,785 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1 MHz | - | 50 nA | 5 mV | 320µA | 12 mA | 1.8 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 5-SSOP |
|
TPA6551-S5TRIC OPAMP 1 CIRCUIT SOT-23-5 |
2,990 | - |
|
Datasheet | TPA655x | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 3V/µs | 10 MHz | - | 400 nA | 250 µV | 900µA | 120 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
TLV3544QPWRQ1IC CMOS 4 CIRCUIT 14TSSOP |
2,000 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 150V/µs | 100 MHz | 90 MHz | 3 pA | 2 mV | 5.2mA (x4 Channels) | 100 mA | 2.5 V | 5.5 V | -55°C ~ 150°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
APX358SG-13IC OPAMP GP 2 CIRCUIT 8SOP |
2,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 10 nA | 1.7 mV | 190µA (x2 Channels) | 90 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOP |
|
|
LMV324Q1MAX/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,687 | - |
|
Datasheet | LMV® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 410µA (x4 Channels) | 160 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
UPC1251G2-E1-ALINEAR IC OPERATION AMPLIFIER SO |
8,413 | - |
|
Datasheet | - | 8-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Push-Pull | - | - | - | 14 nA | 2 mV | 700µA | 70 mA | 3 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOP |
|
INA4181A2QPWRQ1IC CURR SENSE 1 CIRCUIT 20TSSOP |
3,430 | - |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | Differential, Rail-to-Rail | 2V/µs | 350 kHz | 350 kHz | 75 µA | 100 µV | - | 8 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-TSSOP |
|
INA186A4QDBVRQ1IC CURR SENSE 1 CIRCUIT SOT23-5 |
2,955 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | - | 33 kHz | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
UPC811G2-E2-ALINEAR IC |
2,428 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
UPC4062G2-E2-ALINEAR IC |
1,432 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TSV324IYPTIC OPAMP GP 4 CIRCUIT 14TSSOP |
12,382 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.6V/µs | 1.4 MHz | - | 70 nA | 200 µV | 500µA | 80 mA | 2.5 V | 6 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
|
LMV716MM/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
924 | - |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Differential, Rail-to-Rail | 5.8V/µs | 5 MHz | - | 0.6 pA | 1.6 mV | 1.6mA (x2 Channels) | 41 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
UPC813G2-E1-ALINEAR IC |
2,497 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.